Silicon Carbide Heating Elements – Maltec-H Type U

Features

  • Withstands as high as 1600 (surface temperature)
  • Generates high heat output per unit surface area, approximately 5-10 times the output of Nichrome wire.
  • High strength and excellent shock resistance.
  • Chemically very stable.
  • Heat source is free of noise and air pollution.
  • Various coating products are available for protection against water vapor and harmful gas atmosphere.
  • Easy to handle.
  • Standard: IEC 60675
Enquiry

This type is “U”-shaped, consisting of a combination of one each of the EREMA types E and F respectively. It is a single-phase heating element with both cold ends in one direction, facilitating increased furnace design flexibility, because connection terminals can be centered on one side. In addition, a furnace with an energy saving structure can be built because the number of heating element holes on the furnace can be reduced compared with the E or F types.

Specification

Characteristics Items Unit Type
U U3 M E2, F2, U2 SDL
Apparent Density 3.2 3.2 3.2 3.2 3.2
Bulk Density 2.48 2.5 2.48 2.58 2.48
Apparent Porosity % 23 22 23 20 23
Bending Strength Mpa at 25°C 50 70 50 60 50
Specific Heat KJ/KG · °C at 25°C ~ 1300°C 1.0 1.0 1.0 1.0 1.0
Heat Conductiviity W/m · °C at 1000°C 14 ~ 19 14 ~ 19 14 ~ 19 14 ~ 19 14 ~ 19
Specific Resistance Ω cm at 1000°C 0.08 0.10 0.08 0.08 (E2, U2) |0.10 (F2) 0.08
Coefficient of Thermal Expansion 1000°C (x10⁻⁶/°C 4.5 4.5 4.5 4.5 4.5
Max operating temperature in the furnace chamber °C 1400 1400 1400 1400 1400
Standard IEC 60675

Download

Maltec-H Type U – Silicon Carbide Heating Elements_DpstarGroup